ITN CCNA 1 v6.0 Chapter 4 Exam Answers 2018 2019 (100%)

Cisco CCNA 1 ITN v6.0 chapter 4 Exam Answers Routing and Switching (R&S) Introduction to Networks (ITN) (Version 6.00) collection year 2017, 2018 and 2019 Full 100%. CCNA 1 has been know as ITN. The following are the questions exam answers. Guarantee Passed 100%. CCNA 1 v6.0 chapter 4 exam answers has some new update from the old version 5.1. You can review all chapter 4 Exam Answers. You will get passed scored 100% with this version 6.0. Good Luck for Cisco Netacad ITN v6.0 Exam!


From year to year, Cisco has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to "Online Test" link below.

You are watching: What are two examples of hybrid topologies

Version 5.02Version 5.1Version 6.0Online Assessment
Chapter 4 ExamChapter 4 ExamChapter 4 ExamOnline Test
Next Chapter
Chapter 5 ExamChapter 5 ExamChapter 5 ExamOnline Test
Lab Activities
4.2.4.4 Packet Tracer – Connecting a Wired and Wireless LAN

Noted: There are 3 (25, 26, 27) questions were updated in March, 2019.

What are two reasons for physical layer protocols to use frame encoding techniques? (Choose two.)

to reduce the number of collisions on the mediato distinguish data bits from control bitsto provide better media error correctionto identify where the frame starts and endsto increase the media throughput
Explanation:
An encoding technique converts a stream of data bits in a predefined code that can be recognized by both the transmitter and the receiver. Using predefined patterns helps to differentiate data bits from control bits and provide better media error detection.

What is indicated by the term throughput?

the guaranteed data transfer rate offered by an ISPthe capacity of a particular medium to carry datathe measure of the usable data transferred across the mediathe measure of the bits transferred across the media over a given period of timethe time it takes for a message to get from sender to receiver
Explanation:
Throughput is the measure of the transfer of bits across the media over a given period of time. Throughput is affected by a number of factors such as, EMI and latency, so it rarely matches the specified bandwidth for a network medium. The throughput measurement includes user data bits and other data bits, such as overhead, acknowledging, and encapsulation. The measure of the usable data transferred across the media is called goodput.

A network administrator notices that some newly installed Ethernet cabling is carrying corrupt and distorted data signals. The new cabling was installed in the ceiling close to fluorescent lights and electrical equipment. Which two factors may interfere with the copper cabling and result in signal distortion and data corruption? (Choose two.)

EMIcrosstalkRFIsignal attenuationextended length of cabling
Explanation:
EMI and RFI signals can distort and corrupt data signals that are carried by copper media. These distortions usually come from radio waves and electromagnetic devices such as motors and florescent lights. Crosstalk is a disturbance that is caused by adjacent wires bundled too close together with the magnetic field of one wire affecting another. Signal attenuation is caused when an electrical signal begins to deteriorate over the length of a copper cable.

Which characteristic describes crosstalk?

the distortion of the network signal from fluorescent lightingthe distortion of the sent messages from signals carried in adjacent wiresthe weakening of the network signal over long cable lengthsthe loss of wireless signal over excessive distance from the access point
Explanation:
EMI and RFI can distort network signals because of interference from fluorescent lights or electric motors. Attenuation results in deterioration of the network signal as it travels along copper cabling. Wireless devices can experience loss of signals because of excessive distances from a access point, but this is not crosstalk. Crosstalk is the disturbance caused by the electric or magnetic fields of the signal carried on an adjacent wire within the same cable.

What technique is used with UTP cable to help protect against signal interference from crosstalk?

twisting the wires together into pairswrapping a foil shield around the wire pairsencasing the cables within a flexible plastic sheathterminating the cable with special grounded connectors
Explanation:
To help prevent the effects of crosstalk, UTP cable wires are twisted together into pairs. Twisting the wires together causes the magnetic fields of each wire to cancel each other out.

Refer to the exhibit. The PC is connected to the console port of the switch. All the other connections are made through FastEthernet links. Which types of UTP cables can be used to connect the devices?


*

Cisco ITN CCNA 1 v6.0 Chapter 4 Exam Answer R&S 2018 2019 003


All three networks use CSMA/CANone of the networks require media access control.Network 1 uses CSMA/CD and Network 3 uses CSMA/CA.Network 1 uses CSMA/CA and Network 2 uses CSMA/CD.Network 2 uses CSMA/CA and Network 3 uses CSMA/CD.

What is contained in the trailer of a data-link frame?

logical addressphysical addressdataerror detection
Explanation:
The trailer in a data-link frame contains error detection information that is pertinent to the frame included in the FCS field. The header contains control information, such as the addressing, while the area that is indicated by the word “data” includes the data, transport layer PDU, and the IP header.

As data travels on the media in a stream of 1s and 0s how does a receiving node identify the beginning and end of a frame?

The transmitting node inserts start and stop bits into the frame.The transmitting node sends a beacon to notify that a data frame is attached.The receiving node identifies the beginning of a frame by seeing a physical address.The transmitting node sends an out-of-band signal to the receiver about the beginning of the frame.
Explanation:
When data travels on the media, it is converted into a stream of 1s and 0s. The framing process inserts into the frame start and stop indicator flags so that the destination can detect the beginning and end of the frame.

What is the function of the CRC value that is found in the FCS field of a frame?

to verify the integrity of the received frameto verify the physical address in the frameto verify the logical address in the frameto compute the checksum header for the data field in the frame
Explanation:
The CRC value in the FCS field of the received frame is compared to the computed CRC value of that frame, in order to verify the integrity of the frame. If the two values do not match, then the frame is discarded.

Fill in the blank.

The term bandwidth indicates the capacity of a medium to carry data and it is typically measured in kilobits per second (kb/s) or megabits per second (Mb/s).

Fill in the blank.

What acronym is used to reference the data link sublayer that identifies the network layer protocol encapsulated in the frame? LLC

Fill in the blank.

A physical topology that is a variation or combination of a point-to-point, hub and spoke, or mesh topology is commonly known as a hybrid topology.

Match the characteristics to the correct type of fiber. (Not all options are used.)

What is the definition of bandwidth?

the measure of the transfer of bits across the media over a given period of timethe speed at which bits travel on the networkthe amount of data that can flow from one place to another in a given amount of timethe measure of usable data transferred over a given period of time
Explanation:
Bandwidth is the measure of the capacity of a network medium to carry data. It is the amount of data that can move between two points on the network over a specific period of time, typically one second.

What is a role of the Logical Link Control sublayer?

to provide access to various Layer 1 network technologiesto provide data link layer addressingto define the media access processes performed by network hardwareto mark frames to identify the network layer protocol being carried
Explanation:
There are two data link sublayers, MAC and LLC. The LLC sublayer is responsible for communicating with the network layer and for tagging frames to identify what Layer 3 protocol is encapsulated.

What are two examples of hybrid topologies? (Choose two.)

partial meshextended starhub and spokepoint-to-pointfull mesh
Explanation:
A hybrid topology is one that is a variation or a combination of other topologies. Both partial mesh and the extended star are examples of hybrid topologies.

See more: Sticking A Knife In A Toaster, Avoiding Electrocution From Toasters


From year to year, Cisco has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to "Online Test" link below.

Version 5.02Version 5.1Version 6.0Online Assessment
Chapter 4 ExamChapter 4 ExamChapter 4 ExamOnline Test
Next Chapter
Chapter 5 ExamChapter 5 ExamChapter 5 ExamOnline Test
Lab Activities
4.2.4.4 Packet Tracer – Connecting a Wired and Wireless LAN

System Test Exam Answers

Modules 1 – 3 Exam Answers

Modules 4 – 7 Exam Answers

Modules 8 – 10 Exam Answers

Modules 11 – 13 Exam Answers

Modules 14 – 15 Exam Answers

Modules 16 – 17 Exam Answers

Practice Final – ITN Answers

Course Feedback

ITN Practice PT Skills Assessment (PTSA)

Final Exam Answers


Modules 1 – 4 Exam Answers

Modules 5 – 6 Exam Answers

Modules 7 – 9 Exam Answers

Modules 10 – 13 Exam Answers

Modules 14 – 16 Exam Answers

ITN Practice Skills Assessment – PT Answers

SRWE Practice Skills Assessment – PT Part 1 Answers

SRWE Practice Skills Assessment – PT Part 2 Answers

SRWE Hands On Skills Exam Answers

SRWE Practice Final Exam Answers

SRWE Final Exam Answers 


Modules 1 – 2 Exam Answers

Modules 3 – 5 Exam Answers

Modules 6 – 8 Exam Answers

Modules 9 – 12 Exam Answers

Modules 13 – 14 Exam Answers

ITN Practice PT Skills Assessment (PTSA) Answers

SRWE Practice PT Skills Assessment (PTSA) – Part 1 Answers

SRWE Practice PT Skills Assessment (PTSA) – Part 2 Answers

ENSA Practice PT Skills Assessment (PTSA) Answers

ENSA Hands On Skills Exam Answers

Practice Final – ENSA Answers

ENSA Final Exam Answers

CCNA Certification Practice Exam Answers


We are providing training service as the following:

Antivirus

Hosting

Cloud security

Software

Recovery

Transfer

Degree

Data

Security

Host

Email security

Server

Router

Switch

Firewall

Domain Register

Load balancer

Free Software

Free Training

Remove malware

Online Degree

Internet Service

Fiber Optic

UPS

Cooling System

Security Alarm

Data Center

Core Banking

Network Monitoring Tools

SIEM

SDWAN

Security Training

Pentest Training

Offensive Security

Window 10

Window Server

Linux