| 44-in. (112-cm) Snow Blower on X324 Tractor |
| 44-in. (112-cm) Snow Blower |
The 44-in. (112-cm)Snow Blower has the capacity to handle big snow removal jobs.This snow blower works well in all snow conditions and is suited for snow removal around recreational parks, industrial parks, and other applications where snow must be moved greater distances.Two-stage design is ideal for home and estate owners in heavy snow regions.Two-stage snow blower is more effective than asingle-stage snow throwers when operating in wet, heavy snow and deep snow conditions. Thelow-speed auger sizes crusted material as it moves snow toward the second-stageblower.Chute provides consistent snow placement in variable snow conditions because the high-speedblower gives the discharged snow consistent velocity, even in very light clean-up volumes.The optional brush guard or bumper can remain on the tractor when usingthe snow blower.
Compatible with:Select Series™X300R, X300, X304, X320, X324, X340, X360, X500,andX520 TractorsX300R Rear discharge Tractor (see DTAC solution 79224 for snow blowers manufactured before spring 2008, serial numbers 030,000 and below) Two-stage style
| Two-stage auger and blower |
The low-speed auger picks up snow and moves it toward the center of the machine into the high-speed rotor where it is blown out of the discharge chute.A cast-iron gearbox provides speed reduction for the auger and is protected by shear bolts for each auger half.Two-stage snow blowers are more effective than single-stage snow throwers when operating in deep snow as the low-speed auger is used to size crusted material. They also provide consistent snow placement in variable snow conditions because the high-speed rotor gives the discharged snow consistent velocity-even in very light clean-up volumes.
| Durable, second-stage blower fan |
The second-stage blower fan is formed from the same durable and rust-resistant, ultra-high molecular weight (UHMW) polyethylene material proven in the Power FlowTM blower fan for durability and long life.The durable fan material has the same durable cold-weather characteristics as that used in snowmobile track rollers and will not bend and cause the fan to get out of balance. Spout and deflector
The discharge spout and deflector are made from high-density polyethylene material thatwill not dent or rust and resists snow buildup to ensure trouble-free operation. It is more durable, especially in cold-weather use, than thepolypropylene material used by some other manufacturers. Spout direction and deflector angle can both be conveniently controlled from the operator station:The chute material remains smooth and is less likely to clog than a steel chute.Controls to operate the chute are conveniently located for easy operation.The discharge spout can be rotated200 degrees from the operator station.The deflector can be easily adjusted from the operator"s station to determine distance of throw. Adjustable skid shoes
Skid shoes help control the height of the snow blower cutting edge and are especially helpful for use on gravel drives and irregular surfaces.Skid shoes can be adjusted by loosening the mounting bolts and positioning themto suit the operating conditions:Securely held in place by three boltsCan be adjusted for rough or smooth surface conditions Front hitch
The snow blower slips over and locks onto the front hitch with attached snap pins:Fast and easy installation with no tools or loose partsHitch provided with the snow blowerOptional bumper or brush guard can remain on the tractor with snow blower mounted Heavy-duty drive
| Heavy-duty in-line belt and gearbox drive |
| Dependable in-line belt drive (belt colored red) |
Drive system features include: In-line drive belt for efficient transfer of power and dependable operationSpring-loaded idler pulleykeeps belt at the optimum tensionDurable cast-iron right-angle gearbox drives the blower and also provides power to the auger
Specifications| Overall width | 44 in. (112 cm) |
| Clearing width | 44 in. (112 cm) |
| Height to top of housing | 18 in. (45.7 cm) |
| Scraper edge | Replaceable |
| Drive | In-line V-belt |
| Blower fan size | 4-3/4 in. x 14 in. (12.1 cm x 35.6 cm) |
| Blower fan material | Ultra high molecular weight (UHMW) polyethylene |
| Blower fan drive | Cast-iron right-angle gearbox |
| Spout diameter | 6 in. (15.2 cm) |
| Spout rotation | 100 degrees to each side |
| Spout rotation control | Manual remote handle |
| Auger diameter | 12 in. (30.5 cm) |
| Auger drive | Cast-iron worm-drive gearbox |
| Auger bearings | 3/4-in. (19-mm)sealed bearings on each end |
| Auger protection | Shear bolt for each auger half |
| Drift knife | Optional for both sides of housing |
| Skid shoes | Standard |
| Lift system | Spring-assisted foot lift or hydraulic lift (X310, X360) |
| Lift height | 4 in. (102 mm) |
| Weight | 180 lb (81.6 kg) |
| Attachability | No tools required; 5 minutes |
Tractor compatibility and requirements: This 44-in. (112-cm)Snow Blower is compatible with the following:
You are watching:
John deere x300 snow blower installationX300R Rear-Discharge Tractor (see DTAC solution 79224 for snow blowers manufactured before spring 2008, serial numbers 030,000 and below)
Requirements and/or recommendations:X300 Series Tractors with foot lift and shipped with a 38-in. (97-cm)or 42-in. (107-cm)mower deck(X300, X304) or X300Tractors shipped less deck require the AM136646 lift-assist spring kit.
AM136646 lift-assist spring kit is not compatible with tractor modelsequipped with hydraulic lift as standard equipment.
See more:
Is Taste A Chemical Or Physical Property, Physical And Chemical Properties2006 andsome early 2007model year X320, X324, X340, X500, or X520 Tractors shipped with 48-in. (122-cm)or 54-in. (137-cm) mower decksrequire theAM136645 lift-assist spring to replace theM151924 lift-assist spring; the exact serial numbers of the tractors shipped with M151924 are as follows:
